4.8KWH 9.6KWH 14.3KWH 19.6KWH Li Battery Pack LiFePO4 Modular Energy Storage System
The stacked lithium battery system is a chemical electric energy storage system consisting of multiple lithium battery packs and the main control boxes in series, as shown in picture.
It is pre-connected with a power communication wiring harness for plug and play, and equipped with Wifi antenna module for remote monitoring and operation and maintenance services through the Internet. The internal cell is lithium iron phosphate square shell battery.
1. Each battery cell of the stacked lithium battery system is 4.8kwh.
2. A single stack can be extended to a maximum of 7 battery modules, 33.6kwh in total.
3. The maximum two stacks in parallel form a 67.2kwh system.
Modular ESS Features
Modular design for ease of expansion
Higher usable capacity resulting in less battery modules installed
Allows for large installation with no LV Hub
Visual interface, real-time monitoring of product status
User data security
Remote software program update, fault diagnosis
Easy installation
High energy density
Modular Lithium Ion ESS Specification
Intelligent Service Platform for remote monitoring and management
Remote monitored by PC and Bluetooth.
Compatible Inverter brands that have been tested and are supported
SOLIS GROWATT DEYE MEGAREVO LUXPOWER SOFAR Afore,.. Etc.
48V Lithium Battery System
| Brand |
Protocol name |
Communication |
| Pylontech |
CAN-Bus-protocol-PYLON |
CAN |
| Goodwe |
Goodwe communication protocol |
CAN |
| Solis |
CAN communication protocol |
CAN |
| SUNGROW |
CAN-Bus-protocol-PYLON |
CAN |
| CHNT Power |
Chint+Power CAN bus protocol V1.0.0 |
CAN |
| SOFAR |
Sofar BMS CAN bus protocol |
CAN |
| Growatt |
Growatt BMS CAN-Bus-protocol-low-voltage |
CAN |
| Luxpower |
Luxpowertek Battery CAN Protocol |
CAN |
| Sol-Ark |
Sol-Ark CAN Bus Protocol |
CAN |
| TBB |
TBB BMS CAN communication V1.02 |
CAN |
| Deye |
CAN-Bus-protocol-PYLON-v1.3 |
CAN |
| Sunsynk |
CAN-Bus-protocol-PYLON |
CAN |
| LIVOLTEK |
LIVOLTEK CANBUS Protocol of Low Voltage SystemV1.0 |
CAN |
| SOROCEC |
2_CAN1.0 |
CAN |
| MEGAREVO |
Megarevo _5K_BMS communication V1.01 |
CAN |
| Afore |
Luxpowertek Battery CAN Protocol |
CAN |
| Sacolar |
Growatt BMS CAN-Bus-protocol-low-voltage |
CAN |
| SRNE |
PACE BMS Modbus Protocol for RS485 |
485 |
| Deye |
Deye RS485-protocol-pylon-low-voltage-12
9600 |
485 |
| SMK |
SMK GT 20220510.html |
485 |
| Victronic |
Voltronic Inverter and BMS 485 communication protocol |
485 |
| EASUN |
Voltronic Inverter and BMS 485 communication protocol |
485 |
| MPP Solar |
Voltronic Inverter and BMS 485 communication protocol |
485 |
| EPEVER |
EPEVER BMS-Link communication V1.4.pdf |
485 |
| Bentterson |
RS485-protocol-pylon-low-voltage-communication |
485 |
High Voltage Lithium Battery system
| Brand |
Communication |
| Solis |
CAN |
| Goodwe |
CAN
|
| SOLINTEG |
CAN |
| Deye |
CAN |
| SINY |
CAN |
| KOYOE |
CAN |
| Growatt |
CAN |
| INVT |
CAN |
| Sinexcel |
CAN |
| GSSTES |
CAN |
| KELONG |
CAN |
| SINENG |
485 |
| Megarevo |
CAN |
As shown in the following figure, first place the battery unit on the base from top to bottom. Note that the power and communication in-line terminal fasteners are marked in red circles on the left, and the upper and lower positioning components are marked in red circles on the right. The in-line terminal fasteners and positioning components on the base are fully inserted into the positioning and positioning grooves at the bottom of the battery unit.
Figure 1 One battery unit is stacked
Figure 2 Four battery units are stacked
Figure 3 System diagram after four devices are stacked
Functions of LiFePO4 Battery Pack BMS (Battery Management System):
(1) Measurement of LiFePO4 battery terminal voltage
(2) Energy balance between single LiFeP04 cells
(3) Total battery voltage measurement
(4) Total battery current measurement
(5) SOC calculation: estimate the remaining power of the Lithium battery
(6) Dynamically monitor the working state of the LiFePO4 battery pack: prevent over charging or over discharging
(7) Real-time data display
(8) Data recording and analysis: maintain the reliability and efficiency of the entire battery operation
Application of LiFePO4 Battery Pack with BMS
){kind=link}